Raised-panel steel
Carriage house
Modern flush
Full-view glass
LiftMaster openers
Chamberlain openersFull 25-point door and opener safety check with every visit - springs, cables, rollers, tracks, and your LiftMaster or Chamberlain opener included
You get a price before we start. It does not change when the truck arrives.
Get your free estimateGarage Door Company in Glendale, CA
Garage door installation in Glendale usually means working around hillside lots, older Spanish Revival and Craftsman homes, and garage openings that were never built for modern doors. We measure every job before quoting because a surprising number of Glendale garages need low-headroom hardware or custom track work rather than an off-the-shelf setup. If your door is older than your mortgage, call (866) 810-8325 and we’ll walk you through what fitting a new one actually involves here.
Why Glendale Homes Are Different
Glendale’s housing stock runs older than most of Los Angeles County. The Spanish Revival and Craftsman homes built between the 1920s and 1950s came with garages sized for Model A Fords and early Chevys, not modern SUVs. Door openings in the flats near 91203 and 91205 are often narrower and shorter than today’s standard 7-foot by 9-foot frames. In the hillside pockets above Glenoaks and in Chevy Chase, garages are frequently cut into the slope itself, which means limited headroom above the door and sloped approaches that change how a door needs to be hung and balanced.
The climate adds another layer. South- and west-facing doors in Glendale take direct afternoon sun for months at a stretch. Paint fades, weather seals crack, and older wood doors warp. When the Santa Anas blow through, loose hardware gets rattled and tired springs snap under the extra load. All of this means the repair-or-upgrade conversation is the one most Glendale homeowners actually need to have, often before they commit to a full new door.
Styles & brands we work with
Our Main Glendale Services
Most Glendale homeowners call us for one of two reasons: the door has stopped behaving, or the opener has. Both are jobs we handle daily across the city, and each has its own dedicated Glendale page.
Garage Door Repair in Glendale
When a torsion spring lets go in a Glendale hillside garage, the door often refuses to budge at all, and the sound is unmistakable. We carry springs, cables, rollers, and hinges for the brands most common in this area, and we know what Glendale’s older openings and sloped drives do to a door over time. Repairs run $150 to $600 depending on what has failed, and we quote the job before any work begins. See the full breakdown at Garage Door Repair in Glendale.
Garage Door Opener Repair in Glendale
Glendale’s mix of older Chamberlain and Genie units in renovated 1960s homes, plus newer LiftMaster smart openers in rebuilt hillside properties, means opener problems vary from stripped gears to failed logic boards to safety sensors knocked out of alignment. We diagnose the opener itself rather than defaulting to replacement. If we can fix the motor and keep your existing setup working, that is the quote we give you. Details on costs and common failures are on the Garage Door Opener Repair in Glendale page.
What happens when you call
- 1
A real person answersNo phone trees — you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Garage Door Installation in Glendale
Garage door installation in Glendale usually means putting a modern, insulated door into a garage built before insulation was standard. The 1920s through 1950s homes that dominate this city often have single-panel wood doors or thin steel doors with no insulation, sagging hardware, and openings that were never re-framed for a modern door system. We handle that full retrofit: bracing the existing opening where needed, fitting the door to the slope and the available headroom, and pairing it with an opener sized for the actual door, not a generic chart. For a full overview of what installation includes, see Garage Door Installation.
Garage Door Replacement
Signs you need it
Door sections are separated, the bottom panel is rotted or rusted through, or you are tired of slamming a warped door down every morning in a Glendale home that deserves better.
What it costs in Glendale
Full new door installation in Glendale typically runs $700 to $2,200, with the final number driven by door size, insulation level, and whether we need custom track work for a hillside opening.
How we do it
We remove the old door and track, inspect the opening, brace or re-frame as needed, hang the new door with level track, and test the full travel cycle before we leave.
Garage Door Installation Service
Signs you need it
The garage was converted to a workshop or bedroom and needs a working door reinstalled, or the new-build addition is finally ready for its first door system.
What it costs in Glendale
Expect $700 to $2,200 for a complete installation, with low-headroom hardware or side-mount openers in hillside Glendale garages pushing toward the upper end when required.
How we do it
We measure the opening, confirm clearance above and beside the door, spec the right track profile and spring configuration, then install and balance everything on site.
Garage Door Seal Installation
Signs you need it
Daylight is visible under the door, dust and dried leaves blow into the garage, or rainwater has found a path past the bottom section during Glendale winter storms.
What it costs in Glendale
Seal installation is folded into the $700 to $2,200 new door range, and we replace the bottom seal and weatherstripping as standard on every full door job.
How we do it
We pull the old stiff seal, clean the retainer channel, press in the correct replacement for your door brand, and check the seal makes full contact across the floor.
What Garage Door Installation Costs in Glendale
| Item | Typical range in Glendale |
|---|---|
| New door and track (installed) | $700 – $2,200 |
| Standard opener added to install | $250 – $550 |
| Panel replacement (matching existing door) | $250 – $500 |
Will a new garage door fit my older Glendale garage?
Usually yes, but not always without modification. Many 1920s and 1930s Glendale garages have openings smaller than today’s standard, so we may need to adjust the opening or use a custom-track or low-headroom system rather than forcing in a standard door.
Do I need a permit to replace a garage door in Glendale?
Replacing a garage door in the same opening typically does not require a permit in Glendale, but if the opening is being enlarged or the structure modified, the City may require one. We can advise what applies to your specific property when we measure.
Brands We Service in Glendale
We work on what you already have. LiftMaster, Chamberlain, and Genie openers are the ones we see most in Glendale garages, and Clopay doors are common on the newer hillside replacements. Because we are brand-agnostic, our advice is about fit and budget, not inventory. See our brands for the full roster.
See the difference
Before
After
Before
After
Before
AfterPricing for Garage Door Company in Glendale, CA
| Service | Typical range in Glendale |
|---|---|
| Garage door repair | $150 – $600 |
| Spring repair | $180 – $340 |
| Cable repair | $130 – $250 |
| Opener repair | $120 – $320 |
| Opener installation | $250 – $550 |
| Panel replacement | $250 – $500 |
| Track realignment | $120 – $240 |
| Roller replacement | $110 – $220 |
| New door installation | $700 – $2,200 |
What pushes price up in Glendale specifically is the hillside factor: low-headroom torsion hardware, side-mount openers, and longer runs of custom track all add cost but are sometimes the only way a door works correctly on a sloped lot. Whatever the job, you get a firm quote before we start, and the number we agree on is the number on the invoice.
Neighborhoods We Serve in Glendale
We cover all Glendale ZIP codes: 91207, 91208, 91209, and 91210. Most calls from the flats can usually be scheduled within a day or two, while hillside jobs in areas like Chevy Chase or above Glenoaks may need a little longer if a site measure is required first.
- Chevy Chase
- Verdugo Woodlands
- Glenoaks Canyon
- Rossmoyne
- Adams Hill
Service Area – Cities Near Glendale
Gold Star Garage Door Service handles jobs across Glendale and the surrounding communities. Homeowners in Burbank, CA, La Cañada Flintridge, CA, Echo Park, CA, and Silver Lake, CA call us for the same brand-agnostic repair and installation work we do here. If your home sits on the edge of Glendale, we are already working nearby.
Serving Glendale, CA — Our Local Coverage Area
We’re based in the Glendale area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Garage Door Company in Glendale
For spring or cable failures in the flats, we can often arrive the same day or next morning. Hillside jobs that need a site measure for low-headroom hardware may take an extra day to schedule, but we will tell you that when you call (866) 810-8325.
Some Glendale HOAs, especially in the hillside developments and newer communities, have rules about door style, material, or color. We can provide the spec sheet your HOA may request, and we are used to working within those requirements.
Yes. We service individual garage doors in Glendale condo and townhome complexes. If the door is common property, we may need authorization from the HOA or property manager before starting, but the work itself is the same.
What happens when you call
- 1A real person answersNo phone trees — talk to a local garage door pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you — the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Glendale Customers Say
"Opener works, remotes are programmed, no complaints on the work. Took three days to get on the schedule though, so if you've got a car trapped inside, say so when you call."
— Ryan Reed"Keypad stopped working, which I assumed meant a whole new system. It was the batteries and a reprogram. He charged me the minimum service call and told me how to do it myself next time."
— Diego Garcia"Logic board on a 15 year old opener. He was upfront that a new opener would cost less than the board plus labor, and he wasn't wrong. No pressure either way."
— Farah Hassan