Raised-panel steel
Carriage house
Modern flush
Full-view glass
LiftMaster openers
Chamberlain openersFull 25-point door and opener safety check with every visit - springs, cables, rollers, tracks, and your LiftMaster or Chamberlain opener included
You get a price before we start. It does not change when the truck arrives.
Get your free estimateGarage Door Company in Culver City, CA
Garage door installation in Culver City runs from about $700 for a basic steel door to $2,200 for a modern aluminum-and-glass unit, and most jobs take one full day once the door arrives. We handle the quirks that come with this city specifically: 1940s low-clearance garages in Carlson Park, coastal moisture that eats cheap hardware, and new builds in the east that demand clean, high-end finishes. Call (866) 810-8325 for a free measure and a written price before any work starts.
Gold Star Garage Door Service has served Culver City since 2018. We work on what you already have, and when it’s time for new, we install across the full range: LiftMaster, Chamberlain, Genie, Clopay, and more.
Why Culver City Homes Are Different
Culver City’s garage doors are a study in contrasts. On the west side and north end, post-war tract homes from the 1940s and 1950s still hold original single-car wooden doors that have survived decades of coastal fog. Drive east, and you’ll see the tech-driven tear-downs: sleek custom doors on new builds, often with smart openers and modern hardware. Sometimes both exist on the same block. A technician who only knows new construction will fumble the vintage stuff, and one who only knows old doors won’t recognize the engineering on a contemporary aluminum-and-glass install.
The coastal fog belt is the quiet enemy here. Marine layer moisture and salt air accelerate corrosion on steel tracks, hinges, and springs, which means a five-year-old part in Culver City can look ten years old. Inland Santa Ana wind events blow dust into tracks and stress aging openers. Regular lubrication and rust prevention aren’t optional maintenance tips here; they’re what keeps a door from failing during the dry season.
Then there’s the Carlson Park and Sunkist Park challenge. The original 1940s garages were built with low-clearance headers that can’t accommodate modern high-lift doors or standard torsion springs. Out-of-town installers get surprised by this. We don’t, because we’ve custom-ordered low-profile hardware for these blocks before, and we know to measure twice before quoting.
Styles & brands we work with
Our Main Culver City Services
Most Culver City homeowners call us first for one of two reasons: the door has stopped working, or the opener has. Here’s what each involves locally.
Garage Door Repair in Culver City
A broken spring or snapped cable on a 1950s detached garage off Sepulveda isn’t the same job as a track realignment on a new infill townhome near downtown. The older doors have settled, the headers are low, and the hardware has spent years in salt air. We diagnose first, repair what’s broken, and only recommend replacement when the door genuinely can’t be saved. Springs, cables, rollers, panels, tracks – we carry common parts on the truck and know which Culver City neighborhoods need what. The full picture is on our Garage Door Repair in Culver City page.
Garage Door Opener Repair in Culver City
An opener that hums but won’t lift, a remote that works only from ten feet away, a smart opener that’s dropped off Wi-Fi – these are the calls we get from Sherman Oaks to Fox Hills. We repair LiftMaster, Chamberlain, Genie, and Craftsman openers rather than defaulting to replacement. In Culver City, the marine layer and Santa Ana dust both take a toll on opener gears and sensors, so we clean, test, and recalibrate before declaring anything dead. See Garage Door Opener Repair in Culver City for the details.
What happens when you call
- 1
A real person answersNo phone trees — you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Garage Door Installation in Culver City
New garage door installation in Culver City starts around $700 for a basic steel door and reaches $2,200 for a modern aluminum-and-glass unit. The price depends on what’s behind the new door: many 1940s garages in Carlson Park and Sunkist Park have low-clearance headers that need custom low-profile hardware, which adds to the job. We measure, quote a fixed price, then install with the right hardware for the salt-air climate, so the rails and springs don’t start rusting within the year. See our full Garage Door Installation service for what’s included.
Garage Door Replacement
Signs you need it
Your door has a cracked or rotted section, the bottom panel is bowed from years of moisture, or the whole unit is so rusted that repairing individual parts no longer makes sense.
What it costs in Culver City
A full garage door replacement in Culver City runs $700 – $2,200 depending on the door material and whether your garage needs custom low-profile hardware.
How we do it
We remove the old door, check the header and track mounts for compatibility with standard hardware, and install the new door with corrosion-resistant fittings suited to the coastal fog.
Garage Door Installation Service
Signs you need it
You have a new build, a garage conversion, or a door that was never installed properly and has always rattled off-track.
What it costs in Culver City
New garage door installation in Culver City spans $700 – $2,200 for the door itself, with the type of hardware often deciding whether a job lands at the low or high end.
How we do it
We take exact measurements, order the right door for the opening, then set tracks, springs, and panels on a level that works with the existing header.
Garage Door Installation Contractors
Signs you need it
You bought a door from a big-box store or a catalog and need a licensed contractor who will install someone else’s product without grumbling about it.
What it costs in Culver City
Contractor labor for garage door installation in Culver City typically runs $250 – $550 for opener installation, while door install labor falls within the $700 – $2,200 total depending on custom work.
How we do it
We install whatever you already bought, provided it fits the opening, and we quote labor separately so there’s no mystery charge at the end.
Garage Door Seal Installation
Signs you need it
You can see daylight under the door, the bottom seal is cracked, or mosquitoes and dust blow in during the dry months.
What it costs in Culver City
Garage door seal installation costs $120 – $240 when bundled with a track realignment, and the new seal helps keep coastal moisture out of the door’s lower track.
How we do it
We remove the old bottom seal, clean the track of dust and salt residue, and install a fresh rubber or vinyl seal that sits tight against the slab.
What Garage Door Installation Costs in Culver City
| Item | Typical range in Culver City |
|---|---|
| New Door Installation | $700 – $2,200 |
| Opener Installation | $250 – $550 |
| Panel Replacement | $250 – $500 |
How long does garage door installation take in Culver City?
Most standard door installations take one full day once the door is on site. Custom-ordered doors for 1940s low-clearance garages in Carlson Park or Sunkist Park usually add a week or two for the hardware to arrive. We set the schedule before the work starts, not after.
Do I need a permit to replace my garage door in Culver City?
A straight door replacement on an existing track rarely requires a Culver City permit. If you’re changing the door’s size, converting a garage, or altering the opening’s framing, that’s a building-permit situation. We can tell you which side of that line your job falls on before you spend the money.
Brands We Service in Culver City
We’re factory-familiar with the eight most installed door and opener brands, including LiftMaster, Chamberlain, Genie, Clopay, Amarr, Wayne Dalton, Craftsman, and Raynor. That means we stock common parts for each and can usually get a part from local supply within a day. If you’d like the full list, see our brands.
See the difference
Before
After
Before
After
Before
AfterPricing for Garage Door Company in Culver City, CA
| Service | Typical range in Culver City |
|---|---|
| Spring Repair | $180 – $340 |
| Cable Repair | $130 – $250 |
| Opener Repair | $120 – $320 |
| Opener Installation | $250 – $550 |
| Panel Replacement | $250 – $500 |
| Track Realignment | $120 – $240 |
| Roller Replacement | $110 – $220 |
| New Door Installation | $700 – $2,200 |
What pushes a Culver City price up is usually the old-house factor: a low-clearance header that needs custom hardware, a rusted track that can’t be salvaged, or a vintage door that was never standard to begin with. The price we quote before the work starts is the price you pay. No change orders, no surprise line items.
Neighborhoods We Serve in Culver City
We work all four Culver City ZIP codes, 90230, 90231, 90232, and 90233, and we know the difference between a Carlson Park original and a Fox Hills install. Typical response time for repair calls in Culver City is same-day or next morning, and installation appointments are scheduled in advance.
- Carlson Park
- Sunkist Park
- Fox Hills
- Blanco-Culver Crest
- Studio Estates
Service Area – Cities Near Culver City
From our base in West Hollywood, we route to Culver City daily and also cover the surrounding area: Ladera Heights, CA to the south, Century City, CA to the north, Venice, CA to the west, and Beverly Hills, CA to the northeast. If you’re in any of these areas, the same Gold Star standard applies.
Serving Culver City, CA — Our Local Coverage Area
We’re based in the Culver City area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Garage Door Company in Culver City
Most Culver City repair calls get a same-day or next-morning visit, depending on when you call. Emergency spring and cable failures on detached garages get priority because a broken spring can leave a door stuck open. Call (866) 810-8325 and we’ll tell you exactly when we can be there.
Several Culver City condo and townhome associations have rules about door materials, colors, and window inserts. We’ll ask about your HOA at the quote stage and order a door that matches the written rules. If your association only allows certain panel styles, we work within that spec.
Yes. We regularly install a new door in one week, repair the existing opener the same day, or combine both jobs into a single visit. Since we service the eight most common brands, you don’t have to replace a working LiftMaster or Chamberlain opener just because the door itself is finished.
What happens when you call
- 1A real person answersNo phone trees — talk to a local garage door pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you — the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Culver City Customers Say
"Keypad stopped working, which I assumed meant a whole new system. It was the batteries and a reprogram. He charged me the minimum service call and told me how to do it myself next time."
— Diego Garcia"Logic board on a 15 year old opener. He was upfront that a new opener would cost less than the board plus labor, and he wasn't wrong. No pressure either way."
— Farah Hassan"The old chain drive sounded like a freight train through the bedroom above the garage. Went with the belt drive they recommended and now I genuinely cannot hear it open from upstairs."
— Andres Reyes